Sign in to follow this  
admin

LASERWAR UI update. Digital Flag firmware

Recommended Posts

The main point of the changes is Digital Flag debugging in terms of online play. Previously, customers experienced issues where the configurator detected the flag but did not run it in a network game. In order for the flag to run through the server, its firmware must be updated to version 02.02.20.

If when trying to start a round using Digital Flags devices via LASERWAR UI the application gives a warning that it cannot start, please upload the Digital Flag firmware.

To do that, follow the steps below:

1. Download the Digital Flag firmware in.json format from the LASERWAR official website.

2. Close the LASERWAR online configurator app.

3. Launch the app by holding down the Left Shift and Left Ctrl keys on your PC keyboard.

4. If done correctly, the "Upload firmware" button will appear at the bottom of the main window after the application is launched:

5. Wait for the server to detect the connected Digital Flag. To ensure that the Digital Flag is detected by the server, open the pre-start lobby by pressing the START button. The connected devices will be displayed at the bottom of the window. IMPORTANT: if you have several Digital Flags, they must be connected to the server one by one to update the firmware.

6. Press the "Back" button to exit to the main application window.

7. Press the "Upload firmware" button.

8. In the opened window, select the previously downloaded firmware file.

9. Press "Open" - the firmware update process will start. When it has finished, the Digital Flag will be restarted.

Then restart the LASERWAR UI app as normal. The game lobby will display icons for players and detected Digital Flags.

They can be added to the game by dragging them into the special panel above the commands. When you have finished dragging the device into the panel, you can set the colour command for the device in a newly opened window.

The colour of the device can either be grey (neutral) or its background can match the team colour. The device type, charge level, Wi-Fi signal quality and device name are also displayed.

The process of turning flags on/off is synchronized with the start of the scenario, and game events (captures, eliminations, etc.) are counted in the online statistics. The number of points for game events is set in the scenario parameters. The software also displays the device status. These are 6 icons with a white background: explosion, damage, error, alarm, capturing, holding.

The new Digital Flag firmware, in addition to network synchronization, contains another small change that customers have long been asking for.

Flag Control, Confrontation scenarios now have a "Holding time" parameter (range from 0 to 3600 sec.)

The "Holding time" is an additional condition for completing the game when there is an infinite round time.

If you set this parameter to e.g. 1 min. and run an endless round in Flag Control and Confrontation scenarios, the flag will stop the game when the holding time of one of the playing teams has reached 1 min. This team will be declared the winner.

It is important to realize that the "Holding time" parameter only works on an infinite round. If the "Round time" parameter is not zero, the "Holding time" will not be taken into account.

We continue our task on connecting new devices to the arena software. Please wait for new releases. We are waiting for your suggestions.

Share this post


Link to post
Share on other sites

The configurator does not detect either of my flags. I feel like i have read everything I can and they still do not connect. Anyone else have this problem or can me out?

 

Share this post


Link to post
Share on other sites
5 hours ago, retrogg88 said:

The configurator does not detect either of my flags. I feel like i have read everything I can and they still do not connect. Anyone else have this problem or can me out?

 

Did you update the Digital Flag firmware? 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this