admin

LASERWAR devices withstand extreme conditions. But there are certain rules of operation, which apply to all equipment. ALL gaming sets must be kept in a dry, heated room at a temperature from +5 to +35 °C and average humidity is not more than 60%. The equipment must be stored only in a charged state (perfect – at the rated voltage of the battery). P.S. If you are not sure that you can fix the problems all by yourself, then contact the managers for additional advice. I. WEATHER CONDITIONS We strongly do not recommend using the equipment in the rain and at temperatures below -20 °C. Avoid getting moisture inside the layout. If it has happened – stop using it, dry the equipment at room temperature for at least 2 hours. Moisture can ruin any electronic device. Despite the fact, that all electronic boards are varnished on both sides, we do not recommend playing in rainy weather. Electronics treats snow rather indifferently, but it is necessary to remember the following: snow gets clogged into all sorts of technological holes, which can lead to unstable operation of the equipment. Snow itself is not dangerous as water which appears after it melts. Therefore after carrying the device to the warm place let it dry for at least 2 hours. Under no condition you can immediately put the equipment on charge, that was used at low temperatures. It is necessary to allow the electronics to warm up and dry the condensate that has arisen during a sharp change in weather conditions. II. BATTERIES Lithium batteries are used as a power source in gaming kits. To recharge them, you only need to use a universal Li+ automatic charger. Lithium battery (Li+):   "Smart Li+" and "Li+" chargers: First of all, you need to connect the charger to the equipment, and then to the network. The charging process is marked with a special indicator. If the battery is low – the LED lights red, the green light means that the battery is full. Attention! You must charge the devices right after operation  and under constant supervision at an ambient temperature of at least 0 °C for not more than 2 hours. Remember the simple rule: batteries discharge twice as fast in the cold. BRANDED CHARGERS "SPIDER" AND "FIREFLY" "Firefly" and "Spider" are a great alternative to "single-tail" charging, which saves space, does not get tangled in wires and does not overload the mains filter. They can charge 6 game sets at once. "Spider" and "Firefly" protect the battery from overcharging, incomplete charge, overheating. The Firefly is designed to recharge ONLY SRGB bandages. We use a visual display system in the equipment line. The LEDs used in the charger and SCART RGB band will tell the user when the equipment is ready for game fights. It is convenient to use the "Firefly": connect it to an outlet through the power cord, press the power button, connect the head bandage. IMPORTANT: there is also an LED on the bandages. If this LED blinks orange or green at the time of charging, then charging is still in progress. The bandage is ready for use when the LED on the bandage starts to glow green all the time. BUT on the Firefly charging device, the LED will turn green much earlier. If you pick up the head bandage at this moment, the battery charge will remain incomplete. Pay attention to the indicators on the bandage. The Spider charger does not charge RGB head bands of the 9th and 10th generation! The Spider device is designed for simultaneous charging of 6 bandages (up to and including 8th generation) or LASERWAR laser tag game kits. The length of the charging wire is 1.5 meters, the charger itself is connected to a 220 V outlet through a classic computer power plug used for home PCs and monitors. We want to draw your attention one more time, that the Firefly is designed specifically for recharging Smart RGB headbands. Smart RGB headbands do not charged with Spider! For safety reasons, we strongly recommend that you do not leave charging equipment unattended. The "Spider" charger: The Firefly charger: ALPHATAG: CHARGING BATTERIES ALPHATAG is an 11th generation electronics platform from LASERWAR, which went on sale in early 2021. The appearance of the Alphatag is associated with going beyond the hardware and software limitations inherent in the technical solutions of previous generations. The transition to a new element base led to a decrease in the supply voltage, respectively, to the use of new batteries. Attention! Lithium batteries (Li+) with a voltage of 3.7V are designed for use in Alphatag v.1 platform equipment manufactured before July 2022. Since July 2022, the Alphatag version v.2 has been released with 7.4V batteries. Before buying a battery, find out which type you need! Attention! Please note that: Lithium batteries for Alphatag v.1 are charged ONLY with FIREFLY or LI+ chargers. Charging must be carried out under constant supervision. Attempts to charge with other chargers will cause permanent damage to the battery! ALPHATAG: CHARGING BANDAGES The charge level of the Alpha head bandage is displayed on the screen. An "empty" battery on the screen means that the battery needs to be charged. While charging the battery indicator blinks. When the head bandage is ready for use, the battery indicator is constantly seen. Alphatag v.1 Alphatag v.2 Only "Firefly" or Li+ Headbands are charged with a "Firefly" or Li+   Taggers are charged with a "Spider"   DANGEROUS LIFE HACK – TURN OFF TAGGERS TO SAVE CHARGING There is no need to turn off the taggers and bandages in between rounds. Such manipulations create conditions for the formation of condensate: when the equipment is turned off, it begins to cool down, the so-called "dew point effect" appears. Thanks to the protective film, which is applied by our specialists to electronic boards, devices are protected from short circuits during operation. But the general principle sounds like this: the fewer on/off switches, the more reliable and longer the electronic components will work. OPERATION OF BANDAGES AND VESTS When using bandages, attention should be paid to the need to use special hygienic cuffs that protect electronic components from moisture. The cuffs consist of two layers. Air Mesh – the first layer, its fabric consist of a three-dimensional netting, forming cells of different sizes in the outer and inner layers. Such construction provides endurance constant air circulation, gives shock-absorbing properties, which makes the fabric an ideal material for use in places where it is necessary to reduce physical stress and friction without loss of strength. Second layer is a styrofoam substrate that prevents moisture from entering the outer part of the bandage, keeping electronics, special fabric dry and clean. Unloading vests and RPS vests are equipped with a removable breathable lining made of three-layer Air Mesh material. The lining is made in a single color scheme of the vest, it is easy to remove for washing and permanently solves the problem of ammunition sweating after the game. You need to be attentive hygiene issues. After each game, we recommend washing the hygienic cuffs of the bandages. We also advice to buy or to make additional cuffs yourself: you may need several pieces per one gaming day. Hygienic cuff: You cannot continue the game if the cuff is wet. Wet cuff must be dried immediately. When using cuffs, mechanical damage to the caps protecting the sensors sometimes occurs. In such cases, the caps must be replaced. It is necessary to recharge the bandages immediately after the game for no more than 80 minutes. It is necessary to store bandages in a well–ventilated room at a temperature from +18 ° C to +30 ° C and a relative humidity of 45-65%. THE OPTICAL PART OF THE KITS It is necessary to take care of the optical part of the kit. If the optics are dirty, it is necessary to wipe it with special wet wipes. Avoid physical damages of equipment and getting moisture inside the case. STORAGE OF EQUIPMENT The service life of laser tag equipment depends on proper storage and careful operation. Everything is important in storage: well-organized charging of game sets, absence of wires under your feet, temperature and humidity in the room. While equipping rooms, it is necessary to take care of high-quality wiring. Do not use surge protectors without short circuit protection. Storage of equipment can be organized with the help of racks, armory rooms. Armory racks let you to charge the equipment without taking it out of their sections. The mains filter and the "Spider" charger can be hidden under the rack. This is the place where you can also put a small box with different things: remotes, a couple of first-aid kits, LASERWAR bombs. Optical and collimator sights will not have to be removed from the tags. Head bands for taggers can be placed on the cartridge clip, saving the space of the armory. Armory rack: TRANSPORTATION OF EQUIPMENT For the transportation of the gaming equipment, we recommend you to purchase special bags, they will allow you to preserve the appearance of tag guns in case of any damage.  For convenient carrying of head bandages you can use the "Command post", as it has enough space for additional equipment. The "Command post" is available in the store only on order. Also, the bandages are convenient for “stringing” them on control points. In this simple way, you can transport up to 10 bandages. It is obvious, that it would be convenient to organize transportation in this way, rather than all the equipment will be mixed up. LASERWAR Equipment Carrier Bag: WARRANTY OBLIGATIONS Here, in this article we also will remind you of warranty obligations. The warranty applies to laser tag equipment manufactured and supplied by LASERTAG LLC. The warranty period is indicated in the product data sheet. The manufacturer guarantees you reliability of operation of an individual kit “LASERWAR”, provided that the consumer complies with the operating conditions. The manufacturer undertakes to replace or repair an individual set of equipment free of charge, provided that the consumer complies with the rules of transportation, storage, operation and payment for the delivery of defective equipment to Smolensk. The warranty for batteries, speakers, and IR modules is 14 DAYS. Attention! In case of incorrect operation of the batteries (charging with an inappropriate type of charger), the warranty does not apply to the batteries! The delivery of equipment for repair compensation of the cost of consumable spare parts are carried out at the expense of the buyer. It is important to read the manual before start using the equipment. After receiving the order, first of all, carefully read the product passport. Check the package contents and make a test for the operability of all functions: turn on, take shots, reload, etc. If a factory defect still exists, it will manifest itself in the first week of operation. If the device fails due to the fault of the consumer (mechanical damage to the product, improper operation), the customer also has the right to expect warranty repairs during the warranty period, but the cost of consumables and equipment delivery is paid at his own expense. Read more about the warranty obligations at the link. SERVICE CENTERS Any laser tag equipment manufactured by LASERWAR that is under warranty and has malfunctions can be repaired if the warranty conditions are met. Our company undertakes to provide warranty service for up to two years from the date of purchase of our products by the customer. We always work on the improvement of our technical support. Now it is organized via telephone, e-mail, and also different messengers. The list of authorized and unauthorized service centers at the link. Some answers on the questions you can find in the FAQ section. Here we have collected answers on the most frequent questions, including the operation if the devices. If you have some problems with the gaming devices what you have not solved by yourself, then our specialists will provide qualified assistance. LASERWAR never runs away from problems, we are always in touch with our client, and this is one of the most important points in the operation of equipment. 

BETTING ON UNIQUENESS IS THE KEY TO A SUCCESSFUL BUSINESS Over the last few years, a general trend can be traced in the market of goods and services – there appeared a request from customers to strive to express their uniqueness. In many different spheres of life companies close this need very actively.  Thanks to customization banks issue credit cards with exclusive design, clothes manufacturers produce unique items, cafes and restaurants cook food according to unusual recipes – all these things makes it possible for consumers to feel special. The world strives for individuality. If talking not about clients, but about business, here you meet the same rules. To be noticeable on the market you need to rely on uniqueness: generate extraordinary ideas ahead of the competitors.  LASERWAR leads its own way in equipment design, produces something that other companies have not created before. Our new achievements in this field – getting patent on “Trixelion” figures. WHAT IS THE PIQULARITY OF NEW SHELTERS FROM LASERWAR? Main characteristics of “Trixelion” figures: quick installation; fold and unfold in seconds; suitable for outdoor and indoor areas; several colors available.  Figures will be good for away games. The kits are convenient for transportation due to the fact, that the shelters themselves are relatively light and at the same time stable: they are made of heavy-duty material. With the LASERWAR shelters kit you also can show your individuality - to print club’s logo and contact information on the surface the product. This will provide you not only the personal brand awareness, but also it will be an effective marketing tool for attracting new customers.  “TRIXELION” FIGURES - A NEW OPPORTUNITY FOR BUSINESS We create unique products for the development of your business. New shelters will allow you to go beyond the clubhouse. Laser tag will be available in many other different places: in a gym, in a park, in a shopping mall, and also, in the courtyard of the house.    Clients will be interested in new ability that allows them to realize their individual requests. Corporate parties, birthdays, children's parties, competitions – “Trixelion” shelters will help to organize a suitable space for away games.  Uniqueness nowadays is a guideline not only for consumers, but also for manufacturers. Take advantage of this trend and increase profits on people's desire to be individual.  

LASERWAR company produces 3 types of control points (CP): small, medium, big. Small ones are made for children laser tag competition: (average age 7-14 years).  Medium CPs are not used in professional sport. These CPs are used in commercial games or amateur tournaments. Big ones are our standard CPs. The equipment is suitable for professional competitions and is designed for the age group of 14 years and older. LASERWAR control points have another common feature – they make the game extremely dynamic! The main thing is to choose the right height.

No limits to your imagination here, we have prepared some tips on how to successfully combine the game and the most terrifying holiday. Idea №1 You can put no limits concerning the date – 31st of October and offer visitors a whole week or even a month of Halloween-themed games. It turns out that you will also remain in the black and visitors will choose the right time. Idea №2 The Halloween atmosphere can be easily conveyed by decorating your club. This is the first step before preparation. Think up attributes: lanterns, pumpkins, balls, skulls, bats - all this can be done with your own hands. Players' costumes should be loose and not interfere with running, warn participants about this in advance. Idea №3 The most important part of a laser tag game is the scenario. Halloween allows you to come up with new scenarios or completely change old ones. Even capture the flag or control point will be transformed with costumed heroes. "Zombie Apocalypse" is also a great option, where people fight against the walking dead. You can also arrange a "Battle against vampires". In this scenario, with equal preset weapon parameters, a team of people and vampires fight. Don't know what equipment to buy in advance? If you are looking for something new and unusual, then we have a special offer for you - TOP-3 weapons for fighting zombies. Here you will find taggers for arena and outdoor laser tag. AK-12 «Irbis» A series of taggers based on various modifications of Kalashnikov assault rifles is LASERWAR's calling card. The AK-12 "Irbis" game set of the "STEEL" series completely replicates the combat prototype, which is the latest model of weapons. The use of gun plastic reduces the overall weight of the tagger, and the steel body will make it indestructible even in the conditions of an endless zombie apocalypse. АК-12LT «Predator» The AK-12LT Predator PRO game kit from the SPECIAL series is a classic from LASERWAR. Adopted for laser tag use in 2014, the Predator has been through tens of thousands of battles around the world and has proven itself only on the positive side. In the war against zombies, the “classic AK-12LT” will become an indispensable assistant — a reliable and trouble-free tagger. MP9-LT «Phoenix» To confront zombies in laser tag labyrinths, you need a light, compact, ergonomic and maneuverable weapon that will allow you to maneuver in narrow passages, avoiding enemy attacks, and inflict significant damage on them. The MP9-LT "Phoenix" game kit, implemented in the "Cybertag, Black edition" project, will cope with this task better than others. Laser tag is suitable for any holiday. Halloween is a good reason to plunge into the world of mystical heroes and have a great time. Choose a weapon, order in our online store and immerse yourself in the world of laser tag zombie apocalypse!  

Summer has flown by and here is autumn again. Laser tag followers are already organizing last games: it is time to close the season. Autumn is usually beloved season, because hot day are behind, as well as mosquitos and blinding sun. There will still be exciting battles ahead, so it is high time to remind you about the high-tech devices of the LASERWAR company, that will make your games unforgettable.  We are pleased to introduce you three up-to-date devices. They have proven their reliability, and our clients love them for a rich functionality, convenience in use and exclusive design. A smart combat base Depending on the chosen user settings «Combat base» performs several functions in the game. There are three main scenarios written in the software – “Support base”, "Checkpoint" and "Bomb". There are many possible variations, as we made «Combat base» very easy to operate.    You need no additional equipment for setting the device. Intuitive menu interface, three control buttons and bright OLED-display will help you quickly figure out the available options and set the desired parameters. Bright colored pictograms on the case will add additional effects to the selected scenario.  “Smart combat base” – stylish and ergonomic device. There are no bulging details in its construction. Even powerful speaker and big game button were thoughtfully built into the case by our designers. You can bring the base with you – there is special durable handle with fabric cover included. And thanks to the presence of special holes for installation you can hang the device on the wall.  Durable case of the product can withstand any external influences and will last a long time.  The price of the base – $250.  For buying the product follow the link and choose the needed amount of the product. Smart checkpoint The concept of the device combined the features of the Battlefield game and indoor laser tag technologies. Gamers can choose three main scenarios: "Capture Control point", "Battlefield Point", "Command Center", each of which has additional settings to configure.  Check point will become a real godsend for fans of large-scale and long-lasting battles and will make players work very hard. One full scale will be enough for eight hours of non-stop work, so the point will endure several games in a row successfully. The device helps the allies with impulses, harms the opponents and clearly shows the statistics based on the results of the mission. How long does it take to hold a point to win? You will see the answer on the screen. Speaking of the display. It is a part of the indicator panel in the upper side of the equipment. The panel is framed by 80 LEDs. Bright, clearly, informative – everything as we like. Powerful speaker will provide laser tag lovers with high-quality sound.    With such an advanced electronic filling, the device is easy-to-use. All the elements – the administrator button, power button – are located in the lower side of the body. This is enough to adjust all indicators.   And finally, speaking about design. Designed in the style of MILSIM, our check point will give you not only unforgettable experience of playing laser tag, but also will make the game realistic. A protective casing for the case will complement the military entourage, which can also protect the device from bad weather and external influences. We have also provided durable and comfortable belts for carrying a device – it can be easily transported wherever you want. The price of one “Smart check point” is $218. The product is available to order in the online store, follow the link.   “Trinity” Laser Tag Grenade Laser Tag Grenade is capable with any confrontations. It emits IR pulses and it disable the opponent's players which in turn changes the course of events in the battle. “Trinity” from LASERWAR     is a small device with a height of 11 centimeters and a weight of 140 grams. The grenade fits comfortably in your hand and looks very authentic. We made “Trinity” from gun-grade plastic with a high impact strength purposefully. It is the grenade that can be most physically affected. Construction is made in that way, so the electronic filling inside the grenade will remain intact even after dozens of battles. The batteries will not be affected. The device works with the batteries type AAA. It is enough for 14 days of regular games. To change the battery you only need to unscrew one screw. As in other described devices, the functions of a grenade settings are based on the type of a game. Only five simple steps set the necessary parameters. The price of one “Trinity” is $100. Follow the link and buy the device. We hope that LASERWAR devices will take their rightful place in the arsenal of your laser tag club and you will come back to us more than once for high-quality equipment.

Shelters are perfect for outdoor events and for trainings in sport sections – this was approved by numerous tests. Advantages of “Trixelion”: durability – the support posts of sports figures are made of magnesium alloy with chrome coating form - canvases open up like a book. No additional fixings mobility – one person can carry 2 assembled shelters at a time. Your playing area will be ready in 20 minutes thanks to “Trixelion” corporate identity – bright and modern design will make every photo and video from competitions beautiful and unforgettable! Several color options are available on the website. With new “Trixelion” figures outdoor laser tag looks practical, stylish and sporty.

Halloween is a mystical night, when different evil spirits gather together, they are eager to arrange a noisy sabbath. Usually this holiday is associated with pumpkins, blood and dead. In our country there is a common way to celebrate Halloween – put on makeup, dress up as a witch or some dead person and go to a party. But there are many new things in the entertainment world, therefore, the option of a feast or a disco can be left for New Year or mother's anniversary. But Halloween you can celebrate with your noisy bunch of friends in laser tag club, there you can arrange a real battle of the dead and try to save the world. This is where you can truly immerse yourself in the festive atmosphere and have unforgettable impressions that you will definitely want to come back for. The ideas how to organize Halloween, which starts on the night of October 31st will be helpful for: The owners of laser tag clubs can suggest a new game format and attract new audience. Professionals involved in the field of organizing holidays can celebrate kids or grown up birthday parties, meeting of classmates or graduates, corporate events and even weddings. The owners of entertainment facilities – cafes, night clubs, hotels – can expand the range of services with the theme party. A friendly company or colleagues can think in detail and organize themselves an unbelievable night on All Saints' Day. To make a good fest, and in the night of dead all the living survived and stayed pleased, it is necessary to know the peculiarities of arranging laser tag games and to work out the ideas of their implementation in a thematic holiday. THE PROCEDURE FOR PLANNING A LASER TAG EVENING FOR HALLOWEEN Scenario is a basis for every celebration; therefore, you should start with thinking it in detail. But before that, it is important to decide where and for what company this holiday is going to be organized. Because of the fact that this holiday is a holiday of “fear”, it will be better to keep children away from it, therefore the main participants are teenagers and adults. A funny party with laser tag fight, snacks and dancing till dawn can be organized as: A corporate party where colleagues will gather. Alumni meetings. Events for students of secondary and higher educational institutions. Plain friendly meeting Family gatherings, where relatives and friends will gather. WHERE IS THE BEST PLACE TO ORGANIZE HALLOWEEN Because of the fact that Halloween celebration is in the deep autumn, weather conditions is a kind of obstacle to arrange outdoor games. Because of that laser tag is better to be kept indoors. For those who are brave and thirsty for thrills laser tag can be arranged outdoors. In advance you need to take care of warm clothes and appropriate paraphernalia that will convey the atmosphere of the holiday. The most popular options for organizing laser tag parties for Halloween: To organize a full-fledged calibration in a special laser tag club (the whole program of the celebration is included: from transfer and snacks to laser tag fights and contests with prizes). To organize independent trip to laser tag club for conducting a battle as a part of the main celebration, which you can continue anywhere you want (café, shopping center, rent a house, your own apartment, night club).  To order an on-site laser tag for yourself, including it in the event program as part of the entertainment.  These fights will not leave anyone indifferent. You can order an on-site laser tag anywhere you want: to the hotel, to the territory of the campsite, to your own cottage and so in. The specifics of the preparation will depend on the type of laser tag, whereas it is outdoor or indoor, that you will include in your program. WHICH CLOTHES DO YOU NEED FOR LASER TAG FIGHTS? Usually, special vests are issued in laser tag clubs, or they can advice you to wear comfortable sport clothes. Since the games assume running with guns, hiding behind the obstacles and other active exercises, it is important for clothes to be loose and masking. For example, dark-colored clothes are popular in the twilight, and light-colored clothes - on the snow surface.   The rules can be ignored in the Halloween night, because the Halloween costumes are usually black, white, red as blood and have bright elements of orange, yellow, red and green tones. However, you always should take into consideration the fact that clothes must not interfere with running and create risky situations for the health of players, so it is better to change long dresses, robes, raincoats and floor-length capes or abandon them. To replace heels and business shoes, you need to bring comfortable sports sneakers or sneakers. So, laser tag participants should know about upcoming game, it should not be a surprise for them, they must think over the appropriate image for the upcoming event. If you can know the scenario in advance, you can make a costume battle. To do this, half of the team must put on a pre-agreed costume, for example zombies or vampires.  It will be simpler to distinguish the allies and enemies during the buttle. But you can also indicate the roles with the help of paraphernalia and equipment for laser tag games. THE DESIGN OF THE ROOM AND HALLOWEEN DECORATIONS To plunge into the atmosphere of real mysticism and horror, you need to think over the design of the hall, where the game will take place. You can use hand-made decoration: Pumpkins, carved from a real vegetable or made from other different materials. Net made from gauze threads - looks very realistic. Blood splashes from ketchup, beetroot syrup or paint. Candles for making semi – darkness and other lightning gadgets in the form of massive lampshades. Garlands in the Halloween style – with the figures of different evil spirits – cats, bats, skulls, spiders, Grim Reaper, the witch's hat and broom, ghosts, pumpkins and so on. Balloons (usually for Halloween the balloons of orange, yellow, painted with black marker are used). You can decorate the hall all by yourself or it can be done by professions. Many ideas you can find on the internet. THE ORDER OF THE EVENT If a laser tag club suggests a comprehensive service, then you can offer the guests a full range: Transfer from the gathering point to the club and back again Services of a professional make-up artist Holding a laser tag game Snacks A festive show. Contests and prizes Photo shoot But even when organizing independently, it is important not to forget the main components of any festive event. After the arrival of the guests, you can deal with their image, because not everyone has the opportunity to apply makeup on their own, and this is perhaps the most interesting thing when once a year you can try on the image of some kind of villain or the living dead. It is highly advisable to organize at least a small buffet so that guests do not get hungry before arriving at the main party venue, if you decide to stop by the laser tag game along the way. Light snacks in the form of terrifying Halloween paraphernalia will be relevant here. You can also buy food in the store or cook it yourself, or assemble it together, for example, everyone brings something with them. Fruits, vegetable and meat cuts, sandwiches, sweets, etc. are suitable for the buffet. Design options are limited only by your imagination. Usually, pumpkins are made from tangerines, some scary things are made from bananas, sandwiches and sweets are decorated in the form of spiders, zombies, fingers, eyes, brains, salads are presented in the form of skulls, pumpkins, etc. Ideas, again, can be spied on the World Wide Web. In addition to the laser tag battle itself, the celebration of the event should include a show program, animation, fun contests, and, of course, prizes and presents. Quests and contests corresponding to the theme of the evening should also be thought out in advance. It is important not to miss the competition for the best costume on such an evening, additionally announcing several more nominations (the most original image, the scariest makeup, etc.). As presents, you can give guests small souvenirs with the logo of the laser tag club (if the holiday is organized by the club) or Halloween paraphernalia (pens, notebooks, key chains, soft toys, etc.) Guests will certainly want to keep their impressions in the form of photos, so it is preferable to organize a special corner for photo shoots, decorating it in the right style. You can also invite a professional photographer or videographer to capture the best moments of the party. Videography is especially useful during a laser tag battle to capture the most interesting things. LASER TAG GAME SCENARIOS Usually, game scripts are taken from various computer games or popular movies. In the case of Halloween, you can come up with something new or adapt existing scenarios for a themed holiday. The software allows you to set up laser tag equipment for various scenarios, so club owners may well implement the first option of holding games - to prepare unusual plots. If the holiday is organized independently, then you can play games according to the usual rules - only in appropriate costumes — it's even easier in terms of preparation. For example, any heroes can participate in the game "every man for himself" - witches, ghosts, death with a scythe, the Joker, Dracula, the vampire queen, etc. In team games where two teams fight, people and zombies, humans and vampires, female evil spirits against male evil spirits, etc. can act against each other. The living dead or zombies. Two teams – zombies and humans - are fighting for survival. Out of 10 people, the role of a zombie is given to two. If the dead fall into people, they do not die but move to the opposite side. Zombies have more health units, and "humans" have an inverse mode enabled (so that infected participants can be identified, who are now fighting for zombies). The game continues until one of the teams is completely destroyed. The zombie boss. In this scenario, a team of people is fighting against a team of zombies led by an almost invulnerable boss, who has increased the number of rounds and health units. Affected people also switch to the side of zombies, so the team of human players must have reverse mode enabled. The battle against vampires. The peculiarity of this scenario is that with equal preset weapon parameters, a team of humans and vampires are fighting. If you hit an opponent, you can replenish your vitality by the amount of damage done (the main condition is that you cannot exceed the starting health parameter). The Lord of the vampires. In this scenario, two teams are fighting, but the vampires have a Lord who has increased health and damage. And the human team has snipers, stormtroopers and medics. The equipment must be configured accordingly. Ultimate weapon. Two teams are playing. Points are awarded for killing an opponent. The team that scored the most points wins. Scenario devices are installed in the game, for example, a base where you can restore health, an Arsenal – to replenish ammunition by any participant from two teams (their number in the Arsenal is limited). If you want, you can come up with your own scenarios, taking into account the age of the players, the number of participants, their physical fitness and previous experience in laser tag games. Tasks can be complicated or made simpler. The options can be discussed in advance with the organizers of the event so that the participants are prepared, and the game turns out to be exciting and gambling. Laser tag battle is probably the best idea for Halloween, because when else will you fight a zombie or a vampire clan, if not on the most mystical night of the living dead. There is still a reason for ordinary gatherings in a cafe, but the chance that comes once a year should not be missed. You will definitely remember such battle for a long time.

Meet the new product from LASERWAR – vest of the 10th generation! The advantage of this model can be explained by simple math: 1 set of guns = 2 damage sensors. The vest is lined with a special hygienic fabric. Thanks to this feature long hours of games will be played without discomfort for shooters. For more details, please visit our online store.

So much strict, that the sight of a crying kitten with a bandaged paw will not touch their withered hearts! But our guys firmly resisted harsh looks and raised eyebrows, 8-hour transfer, flight delays for a period of time “Are we really going to Jakarta?” and even a couple of questions with luggage! And what is it for? To understand that Jakarta is magical! This country is unique and unbelievable! FUN ASIA EXPO 2024 even makes Nick smile Bright colors, luxurious tropical nature, big city lights, joy and intense interest to our projects makes a good base for conquering new markets! First day of exhibition was excellent and fully paid off the adventures of our guys! Keep working

Leading designers, investors, entertainment industry providers will gather in the capital of Indonesia. LASERWAR will show its equipment in the Indonesian market - a place with great potential, where all the shopping centers, aquaparks and exhibitions are concentrated. We are glad to show you all the new products of VR franchises and laser tag!

The only thing that you need is a rich fantasy. We will share some ideas  how to go to White Castle during the last weeks of August. Party in the style of post-Apocalypse! We have suitable sets of quest equipment in our arsenal: «Pandora's Box» and «Zombietag». The players  will become the last hope of humanity, they will save the world from the dangerous virus and living dead. Spy scenario! We offer the devices «Burglar» or «Explosive device simulator. Find and defuse». Even James Bond will  envy LASERWAR's secret missions. Home laser tag sets! Special kits from LASERWAR! Garden or yard can become an arena for fight for the title of the most accurate shooter. You only need  to do your best to keep the beds and flower beds alive. Remember, laser tag is a great opportunity to help schoolchildren spend last summer days absolutely  breathtaking!

LASERWAR continues to conquer the world! This time we travel to the biggest island state – fly to Indonesia! Tourist all over the world only can dream about vacations in Bali , and we are packing our bags for Jakarta – for the FUN ASIA EXPO 2024 exhibition. On the 21st and 22nd of August the best representatives of the entertainment industry will meet here: developers, operators, investors and others. FUN ASIA EXPO 2024 – is a great possibility for companies to test and use a great potential of Indonesian market. The island state is situated on the way to the world economic powers: state GDP is over $1 trillion! There are huge trade centers and exhibitions, family entertainment centers and aquaparks. LASERWAR will get acquainted with innovations in the entertainment world and will present the developments of its own. Let’s take with us laser tag and VR-games – they will capture the attention of the public for sure!

You can find LASERWAR equipment in 93 countries all over the world. Such a wide geography requires special approach to the work with clients. Not long ago our specialists visited South Korea and there had an appointment with our dealer JK Lee. It is always interesting to know how the matters are going in different countries, how the customers respond to the game, how the work goes with the equipment, and how comfortable it is for the partner to interact with our company. LASERWAR technical support specialist got not only the feedback, but also helped to set up the equipment, explained the features and principles of operation, and helped to understand the nuances of the devices. Thanks very much to our dear friends from South Korea, soon we will visit them with a batch of new equipment and updating of settings. Do you want to know how to become our partner? The LASERWAR company managers are ready to tell all the details. We are always glad to help your business grow and evolve.

Dear friends, we hasten to tell you that starting August 1, the LASERWAR company will begin accepting orders for new sports figures. We have designed the construction from the very beginning, have tested the shelter for three years – it turned out to be light and compact, but these are not all the advantages. Sports figures are made of sailing fabrics, supporting structures and fittings. Durability and comfort are two integral criteria when creating shelters. The support posts are made of magnesium alloy with chrome plated. The structure is securely attached and quite stable. Assembly does not take much time: the canvases open like a book and are easily connected. The figures are very mobile — one person can move two assembled shelters at once. We selected the sizes so that they can be quickly transported and conveniently stored. height of assembled figure 180 cm width of one sail sheet 80 cm diameter of assembled figure 160 cm diameter of support posts 30 mm height of support posts 180 cm weight 4 kg The ultra-durable material complements the branding, which symbolizes sport and movement. For now, the figures are available in our store only upon order. Delivery payment is calculated separately with the manager.

Dear Friends, the largest exhibition of innovations Metaverse Expo 2024 is taking place today in Seoul! We are here for the first time attending an event of such format, it unites the technologies of artificial intelligence, the industrial metaverse, science and innovation. Asia has always warmly welcomed our verified developments in laser tag. We have brought here not only VR-games but also a laser shooting range. There are already some interested people exactly in the laser tag industry on the first day of Metaverse Expo. And it is just the beginning. Hundreds of acquaintances are waiting for us, it is also exchange of experiences and discovery of new opportunities we are looking for. It is a real unique chance – we will show LASERWAR innovations and our VR-technologies to the whole world. Stay with us for more details.

Several important functions for professional gaming and more realistic combat have been realized in the Alfatag generation. We have released one more lightweight and technological vest model from the SPORT series. It differs from the previous ones in its convenient clasps - the straps are adjustable to suit any type of the body. It is also provided with Velcro fasteners front and back to attach team insignia. The vest has built-in control units. The main gaming information is displayed on the screen.  The damage sensors are made in the form of a hexagon with a proprietary engraving. They are located on the back, on the sides and in front. It increases the number of target areas as the sensors eliminate blind spots. A powerful external battery is used as a power source, capable of withstanding 36 hours of gaming without interruption with the Wi-Fi module turned on. Replaceable lining is easily removable for washing. The vest is designed in the classic black and available for order. We also remind you that you can buy purchase body armor and another model of the Alfatag vest in our store.  

It is the first day of IAAPI Amusement Expo in Mumbai, we have sent the bravest and most motivated  ones. While our team is communicating with visitors, getting acquainted with the local culture, there are still two busy days ahead. We are going to tell you many interesting news. India has already brought various surprises. The exhibition place is unusual, contrasting and not at all tourist area. Let's put it bluntly, India has melted our hearts. We did not expect such a response and interest in our company’s projects. Laser tag and virtual reality are literally in great demand. During all the days of the exhibition, there was not even a couple of minutes when the LASERWAR stand was left without visitors. So far, IAAPI has been one of the most successful foreign business trips.

On June 26, hundreds of influential IT and technology companies will gather in Seoul – there begin preparations for the largest innovation exhibition METAVERSE EXPO 2024! VR is a modern trend in the entertainment industry, and the number of users of virtual reality devices is increasing every day. LASERWAR will overcome some difficulties on their way to the exhibition and show Russian VR technologies. METAVERSE EXPO 2024 is a chance to prove that VR and AR projects, AI and other technologies are shaping our future. They successfully interact with all areas of human life, whether it is entertainment, games, education or others.

The developers of LASERWAR have added a new scenario to the laser tag shooting galleryjust like in a classic Western film! Software has been updated and now the shooters will fight in a duel. Do you want to find out who is the fastest and the most accurate of you? Then the “Duel” scenario gives you such a chance. In a new scenario the shooters must be the fastest to hit enemy targets. At the beginning, the targets light in the color of the team, but when they are shot, they light white. The hit target goes out and the next one lights up. The round finishes when all the targets are hit. Three seconds before the start there will be a signal, so extra action is available for the users. For example: the shooter stands back to the targets and after countdown he turns and starts shooting. Scores depends on the targets hit. Important to clarifythat the number and order of target ignition is calculated in advance and randomly. The game is fair: the number of goals for opponents is the same. Time is up and the targets are not hit completely? Then the one who scores more points wins.

Dear friends, application for lasertag shooting gallery "Wild West" has been updated. This beloved attraction trains players' coordination, speed and accuracy, as well as concentration of the players. LASERWAR developers have upgraded the laser tag shooting range, and now the program includes: 1. New function while adding the players. After a shot, the target lights up with the color of the player's team and shows his ID (if ID is less than 100). 2. A shoot-in mode has been added. Shoot at a target with a tag gun of any color and ID - the target will light up for a second in the desired color, and the shots will be counted on the indicator. The new mode is included in the software application. “Wild West“ is different in its mobility: targets and tag guns can be used outdoors, in clubs, or even at home. All you need is laptop or PC. Update for laser tag shooting gallery is available for users. Install and try new features!  

ASIA ATTRACTIONS EXPO 2024 - the Asian exhibition of entertainment and attractions amazed with its size. Thousands of participants and even more guests from all over the world. LASERWAR team has spent three mazing days in Guangzhou. We saw a great number of attractions: from classical slot machines to innovative carousels. But you can't imagine modern entertainment without virtual reality. Our VR projects are very popular abroad. During the exhibition the guests highly appreciated the games created by the WARSTATION and AVATAR GAMES team. They liked not only the graphics, scenario but also a well-thought-out format for small areas and favorable conditions for starting a business. Laser tag is also in demand for Asian audiences. We told a lot about our company, production and sales of our laser tag equipment. As a result - new acquaintances, partners and impressions. China met us with great interest, friendliness, as if hinting that there was only more to come.

LASERWAR will visit the largest exhibition in the East - Asia Amusement & Attractions Expo 2024. AAA Expo is more than 130,000 square meters, 6,500 representatives from around the world and 150,000 visitors. Just imagine the scale! And we’re in the middle of it. From 10 to 12 May we will present all our franchises and open the world of the future for participants from Europe, America and Asia. We will present our VR-games and exclusive novelty - PRO-CARDS. Strengthening the position of leader in the entertainment industry and giving unlimited opportunities for new partners. See you later!

Friends, we know that many laser tag players have been waiting for this. Without any  words, we inform you that we have done a lot of work to introduce new functional and  optimization of the LASERWAR configurator. 1. Access levels have been updated in the software. Now there is an administrator, an  instructor and a guest. When you first launch the software, you will see a window for  registering a user with the “administrator” access level.  Registration through social networks is possible. “Administrator” has access to all the  functions of the application. A “guest” (unregistered user) will not be able to record settings, launch the game, or  work with statistics. In fact, the “guest” only opens the application and follows the links  from the “News” and “Cybertag” sections. The “instructor” changes the tactical and technical characteristics settings, play games,  saves and publishes statistics. He cannot edit fiscal data of completed game sessions,  add new users or delete existing ones, or edit access rights. 2. Connection with the developer in case of errors in the application. Similar functionality has already proven itself in Alfatag and will now be available to the  users of the tenth generation. The “Feedback” item has appeared in the general  settings of the application. In case of a problem while working with the software,  describe it in as much detail as possible, check the “Attach logs” (don’t forget to set the  time interval) and “Attach a database” checkboxes, then send a report to us. As soon  as possible, the developer will identify the causes of the failure and fix it. If necessary,  he will contact you at the email address specified in the report. 3. Full customization of the application appearance. Previously, you could only change the background of the main window and the start  lobby, as well as images and links for the “News” and “Cybertag” sections. Now there is an opportunity to: — design each section according to your taste: upload the images you like instead of  the standard ones. — change the appearance of the main menu: now there is a possibility to remove  unnecessary tiles (e.g. in the screenshot). — upload your own images (only in .svg format) for weapon class icons — upload your own images instead of standard player avatars — upload images for command icons — use your own column names in statistical tables. In the general settings of the application (gear in the upper left corner of the main  menu), there appeared an item called “Interface Settings”, which will allow you to make  changes. 4. Adding arena sounds. In the “Sounds” section of the Configurator a new subsection has been added, it is  called “Arena Sounds”. For each scenario three background tracks are prepared. If  necessary, you can download the music files you need (only .mp3 format is  supported). Playback starts automatically after the start of the round. “Event Sounds”  are also available - the launch of a particular scenario, double/triple kills,  activation/deactivation of IEDs, capturing/holding flags - these and many other game  events will be sounded by the application. You can find the entire list of event sounds  in the item of the same name, and also replace these effects with the ones you like. 5. The medals received by the players can now be viewed directly during the battle.  They are displayed both in the start lobby and in the dynamic statistics window. When  you hover your mouse over the icon, there will appear a description of what you have  received the medal for. This function is enabled in the round settings. 6. We solved the problem of equipment firmware using the Configurator. While starting  a network game, some kits might not start. Now, in this situation, the software will send  the “start game” command to the tag gun until the kit starts or the user stops the round. To set this parameter, go to the application settings, find the item “Timeout for waiting  for the game to start with a tag gun” and set the time during which the software will  attempt to start the game on the kits. If at the same time the Configurator indicates that the statistics on the kit are damaged,  it will automatically stop the game on this tag gun, clear the statistics and reactivate it.  The automatic statistics clearing function will help users with this. 7. While adding a gamer into the database, you can create an avatar according to your  personal taste. 8. New terms of the end of the game. — “Limitation on frags for each player.” As soon as any fighter completes the number  of virtual kills mentioned in the scenario settings, the round will stop. — “Limitation on frags per team.” As soon as the fighters of each of the teams  participating in the game commits the specified number of virtual kills, the round will  stop. 9. Now it is possible to publish game session statistics on social networks. 10. As practice has shown, the more records are stored in statistics, the higher the  probability of hanging of the application. Right up to exiting.  Not to upset the fighters,  the developers have added a function of deleting games. You can clear both an  individual game (session) and for a selected period of time (including completely).  11. Access to application sections during the game. Previously, when starting a  network game, the user could only switch between the start lobby and the dynamic  statistics window. Our developers have opened access to all sections during the game.  To do this, just click the “Back” button in the lobby. The LASERWAR online configurator update will become available in the next 24  hours.

  For each player laser tag his. For someone - a drive game, for others - sport, for the third - a hobby. But every year laser tag is modernized, revealed in a new way. We have something to tell you, the whole story in one video.

We would say we are lazily breaking into the world’s exhibition space... But! As a tradition, every February our team goes to represent the company’s products in the international arena. This year is no exception!  From February 27th to 29th, the LASERWAR team is going on the first overseas trip this year. Mumbai — "Indian Gate". There will be the country’s largest international exhibition in the entertainment industry — IAAPI Amusement Expo.